Home > PRODUCT > Iron powder > atomized iron powder > iron powder for powder metallurgy
LAP100.29P1 is widely used for the production of high density PM structural parts and magneticparts.
LAP100.29P1 is atomised based phosphorous alloyed powders Which contains 0.45%- 0.65% phosphorous based on LAP100.29, which gives the powder very high compressibility. Sintered parts made from LAP100.29P1 exhibit high strength in combination with very high ductility. An addition of graphite and/or copper will give still higher strength with retained or even improved dimensional stability. LAP100.29P1 is also suitable for components requiring good soft magnetic properties.
Specification of Atomized iron powder LAP100.29P1
|
Chemical Properties（%） |
Unit |
Specification |
|
|
Min |
Max |
||
|
C |
% |
0.05 |
|
|
Si |
% |
0.05 |
|
|
Mn |
% |
0.15 |
|
|
P |
% |
0.45 |
0.65 |
|
S |
% |
0.015 |
|
|
HL |
% |
0.20 |
|
|
Physical Properties |
|||
|
Apparent density |
g/cm3 |
3.00 |
3.30 |
|
Flow rate |
s/50g |
28.00 |
|
|
Green density 600Mpa |
g/cm3 |
7.06 |
|
|
Particle size distribution（%） |
|||
|
180-212um |
% |
1 |
|
|
150-180um |
% |
10 |
|
|
45-150um |
% |
||
|
-45um |
% |
15 |
30 |
PRODUCT PACKING
25kg/bag, 1000kg/bag, the package can be customized by buyer’s requirements.
Copyright © Shanghai Knowhow Powder-Tech Co.,Ltd. All Rights Reserved - Privacy Policy
